Accessibility Links
  • Job reference: RMS0165528

SURF QC inspection URA / LRA Fabrication Site

  • Sector: Oil & Gas
  • Location: Inverness
  • Job type: Contract
  • Date posted: 24/02/2016
  • Time left:
    d h m s
This vacancy has now expired.
Send jobs like this to my email
The Role:
The service holder is responsible, within the team and under the SURF QA & QC superintendent
supervision, for following-up, monitoring and witnessing welding, coating and quality control activities carried out by
SURF Contractor and/or Subcontractors at the URA (Upper Riser Assembly) / LRA (Lower Riser Assembly) fabrication
In this respect, and to ascertain that the equipment/facilities are built as per the project requirements, the service holder
witness and / or monitor welding, NDE, coating activities and verify Contractor’s and/or Subcontractors’ NDE report.
The service holder shall be knowledgeable GS EP STR, GS EP PLR, GS EP COR and AWS D1.1.
He reports on a day-to-day basis directly to the SURF QA & QC superintendent.
The service holder organises and participates to routine and random inspections and audits, assists to daily / regular
Fabrication meetings related to his discipline with SURF Contractor and/or Subcontractors, performs QC and/or HSE
visits and tours... and ensures an adequate reporting to the SURF QA & QC superintendent (areas of concerns,
problems encountered in its discipline during fabrication and implementation both by the SURF Fabrication team and
SURF Contractor and/or Subcontractors).
The Service holder ensures their full implementation by SURF Contractor and/or Subcontractors Project Site
documentation applicable in the perimeter of the relevant SURF Fabrication site (Project Site QA/QC plan, fabrication
plans, fabrication drawings …).
As a general manner, the service holder provides assistance to the SURF Fabrication team with all matters related to
his discipline.
The service holder is also accountable for demonstrating, individually, an exemplary behaviour with regard to HSSE
rules & requirements.

1. To adopt and to demonstrate an exemplary behaviour with regard to Company Ethics and
“Code of Conduct” policy and HSSE rules and regulations.
2. To have knowledge of Company and Project technical referential and international standards
related to his area of responsibility, taking knowledge from them for application to the Project.
To develop, as required, discipline specific instructions at Fabrication Site.
3. To ensure promotion and implementation by SURF Fabrication team of the Project Site
QA/QC plan and procedures.
4. To ensure all along fabrication phase that the SURF Contractor is enforcing his contractual
commitments, is implementing properly his Fabrication plan and objectives, and is performing
safely his activities as per Project specifications, design and codes.
As such, he shall:
- Participate to site weekly & on call meetings.
- Implement the relevant Contractor's and suppliers ITP's and procedures;
- Monitor and control the implementation on site of the approved drawings, approved
QA/QC plan, Surveillance plans, Inspection and test plans;
- Ensure that the works are closely inspected by the Contractor’s QC inspection team (e.g.
VT / DC / RT, UT, MPI, PMI, coating inspection etc.);
- Witness inspection points upon quality control plan
- Supervise the Project Surveillance and QC activities performed on site;
- Ensure that the works are closely inspected by the contractor’s QC inspection team;
- Report immediately to SURF QAQC superintendent any anomaly or non-conformity;
- Propose issuance of ICR (Investigation & Correction request) for any issue not documented by Contractor.
- Attend and participate in daily meetings; Attend, when requested, the various fabrication
meetings, and provide support to the CSR in its various reviews
- On request participate to fabrication, HSE or QAQC specific audits or visits; Provide daily
inspection & activity reports at least weekly report required.

5. Continuous monitoring of Contractor and suppliers performance on site and proposed any
modification, improvement, ICR deemed necessary. Close monitoring of any NCR, IRC issued
up to satisfactory closure.
6. In General:
- To assist the SURF QA & QC Superintendent as and when required;
- To provide technical support and assistance to Company personnel, and also to
Contractor' and Suppliers' personnel if needed;
- To implement Discipline methods for the supervision of the day to day activities;
7. To report to the SURF QA & QC superintendent wrt to Discipline activities, in particular when
deviations to works are detected.
8. To ensure confidentiality of all the documentation issued under his area of responsibility.

Position on 5 days per week basis with possibility to work 6 days per week upon project needs (to be agreed and
validated on site by CSR).
Fabrication activities are conducted during day (7 am to 5 pm) / night shift (5 pm to 3 am) and regular spot supervision
will be required during night shift (~ twice per week). This will have to be coordinated and agreed on site with CSR and
QA & QC Superintendent
Similar jobs
Dawn Gagon
Main Automation Inspector Location Kazakhstan Duration ongoing The Role: Fircroft are seeking a Main Automation Inspector...
Chris Hughes
Lead Decommissioning Engineer-Topsides & Pipelines Location Norwich, Norfolk Duration permanent The Role: This position is responsible for the planning...
Inspection Advisor Location Baton Rouge, Louisiana Duration 9 months The Role: MAIN FUNCTIONS * Promote safety within area of...

Back to Top